Parmar Steel

Materials for Flanges

Pipe flanges are manufactured in all the different materials like stainless steel, cast iron, aluminium, brass, bronze, plastic etc. but the most used material is forged carbon steel and have machined surfaces.

In addition, flanges, like fittings and pipes, for specific purposes sometimes internally equipped with layers of materials of a completely different quality as the flanges themselves, which are "lined flanges".

The material of a flange, is basically set during the choice of the pipe, in most cases, a flange is of the same material as the pipe.

All flanges, discussed on this website fall under the ASME en ASTM standards, unless otherwise indicated. ASME B16.5 describes dimensions, dimensional tolerances etc. and ASTM the different material qualities.

Dimensions of Flanges

Each flange ASME B16.5 has a number of standard dimensions. If a draftsman in Japan or a work preparer in Canada or a pipefitter in Australia is speaking about a Welding Neck flange NPS 6, Class 150, Schedule 40 ASME B16.5, then it goes over the flange which in the image here below is shown.

If the flange is ordered, the supplier want to know the material quality. For example ASTM A105 is a forged carbon steel flange, while A182 is a forged stainless steel flange.

So, in a correct order to a supplier two standards must be specified..

Product Details: Slip on Flanges are a popular type of pipe flanges. These are type of flanges that slide over the end of piping and then welded in place. These flanges are ideal for lower pressure applications. These are easily fitted and welded into different pipes. Welding reduces fabrication costs of these pipes. These are available in wide variety of sizes and applications.

Materials used:

Common materials used are as follows:

• Stainless steel
• Brass
• Steel
• Alloy Steel
• Aluminum
• Plastics
• Titanium
• Monels
• Carbon steel
• Alloy titanium etc.

Features:

• Some important features are as follows:
• One size fits all pipe schedules.
• Fabricators can more easily cut pipe to length for slip-on flanges.
• The smaller thickness of this flange allows for easier alignment of bolting holes.
• They are generally not preferred for high pressure temperature environments.

Advantages of slip on flanges:

• Low cost installation
• Less time needed to spent on ensuring the accuracy of the cut pipe
• They are somewhat easier to align
• The slip-on flanges have low hub because the pipe slips into the flange before welding
• The flange is welded both inside and outside to provide sufficient strength
• They prevent leakage

Product Details: Weld Neck Ring Joint Flanges are designed for use in changing diameters in a piping system. A weld neck ring joint flange comprises a flange with one specified diameter having a bore of a different and smaller, diameter. Except for the bore and hub dimensions, the reducing flange will have dimensions of the larger pipe size. These flanges are used at the outlet side of the expansion joint to increase the size of the flange.

Additional Information:

• Production Capacity: As per requirement
• Delivery Time: Ready stock
• Packaging Details: Standard

Product Details: Slip on Flanges are a popular type of pipe flanges. These are type of flanges that slide over the end of piping and then welded in place. These flanges are ideal for lower pressure applications. These are easily fitted and welded into different pipes. Welding reduces fabrication costs of these pipes. These are available in wide variety of sizes and applications.

Materials used:

Common materials used are as follows:

• Stainless steel
• Brass
• Steel
• Alloy Steel
• Aluminum
• Plastics
• Titanium
• Monels
• Carbon steel
• Alloy titanium etc.

Alloy steel flanges are mainly made up of chromium, molybdenum, and nickel composition along with other products. These flanges show excellent corrosion and oxidation resistance. They are widely used in water lines, oil, and gas, chemical plants, food production systems, etc.

Alloy steel flanges

Alloy steel flanges are mainly made up of chromium, molybdenum, and nickel composition along with other products.

These flanges show excellent corrosion and oxidation resistance. They are widely used in water lines, oil, and gas, chemical plants, food production systems, etc.

Parmar Steel manufactures and trades Stainless Steel 304 Flanges to a wide range of industries across the globe. We have a well-equipped infrastructure in Mumbai, through which we develop and deliver a broad range of outstanding products. Our SS 304 Flanges are austenitic steel products with chromium and nickel contents. When compared to regular steel, 304 Stainless Steel has better corrosion resistance. 304 Grade is widely used for its properties like weldability and ease of formability. These SS 304 Flanges offer resistance to a wide range of atmospheric environments and corrosive media.304 SS Flanges are commonly used to connect pipes, valves, pumps and other equipment to form piping systems.

Product Details:

We offer a comprehensive range of Long Weld Neck Flanges that is suitable for high-pressure, cold or hot temperature applications. Manufactured using quality material, long weld neck flanges flanges are available in various dimensional specifications and can also be customized as per specific requirement of our clients.

 

15 NB UP TO 600 NB IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / Table 2.5, table 6, table 10, table 16,table 25, table 40, table 64, table 160, table 320, table 400

Form : Slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank, screwed boss.

Nickel & Copper Alloy
Nickel Alloy
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ), UNS 4400 (MONEL 400 ), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276)
ASTM / ASME SB 160 UNS 2201 (NICKEL 201)
ASTM / ASME SB 472 UNS 8020 (ALLOY 20 / 20 CB 3)

Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600. ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30)
ASTM / ASME SB 152 UNS NO C 10100, C 10200, C 10300, C 10800 , C 12000, C 12200.

Stainless & Duplex Steel
Stainless Steel
ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H , 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H

Duplex Steel
ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61.

Carbon & Alloy Steel
Carbon Steel
ASTM / ASME A 105. ASTM / ASME A 350 LF 2.

Alloy Steel
ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91.

Product Details: We provide wide range of orifice flanges that is designed as per the international standards of ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE. We also provide these flanges with mill test certificate as per EN 10204 / 3.1B. These are fabricated using the premium grade materials and are in strict adherence with the prevailing industrial standards. Further, these are offered at market leading prices.

Specifications:

• Size: 1/2"NB TO 10"NB IN
• Class: 150 LBS, 300 LBS

 

Standards:

• ASTM / ASME SB 564 / 160 / 472
• UNS 10276 (HASTELLOY C 276 orifice flanges)
• UNS 2200 (NICKEL 200 orifice flanges)
• UNS 2201 (NICKEL 201 orifice flanges)
• UNS 4400 (MONEL 400 orifice flanges)
• UNS 8020 (ALLOY 20 orifice flanges)
• UNS 8825 INCONEL 825 orifice flanges)
• UNS 6600 (INCONEL 600 orifice flanges)
• UNS 6601 (INCONEL 601 orifice flanges)
• UNS 6625 (INCONEL 625 orifice flanges)

 

Carbon steel orifice flange

• ASTMA 105 Gr. F42/46/52/56/60/65/70

 

Alloy steel orifice flange

• ASTM SA 182 F1/F5/F9/F11/F22/F91

 

Low temperature carbon steel orifice flange

• A350 LF2/A350 LF3

 

Stainless steel orifice flange

• Standard: ASTM A182
• Grade : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Product Details: The stainless steel drawing flanges are offered in different pressure ratings, dimensions and other specifications. These drawing flanges are made of highest quality stainless steel.

Conforming to ASTM and ASME specifications, our stainless steel drawing flanges are suitable to be used in critical hydraulic-pneumatic applications in various industries.

Carbon Steel : ASTM A 105, ASTM A 181

Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276

Copper Alloys : Copper, Brass & Gunmetal

Size : 1/8" NB TO 48"NB.

Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.

Standard
ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

DIN :DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

B.S : BS4504 , BS4504, BS1560, BS10

Product Details: PARMAR STEEL supplies and export an extensive range of ANSI Flanges, which is a type of pipe flanges available in various materials. These products are specially designed in such a way that the outer diameter of the pipe is slightly smaller than the diameter of the flanges. To ensure that these products comply with the industry standards, our experienced professionals stringently check and test on various required parameters. Furthermore, we swagat offers SORF Flanges at reasonable prices.

• Flanges Grade : ASTM A 182 F 304/L; 316/L; 317/L; 309; 310; 321; 347; 904L.
• Type : SORF, BLRF, WNRF, SOLJ
• Table : D, E, F
• Class : 150 To 3000

Flanges Range : DN15 Upto DN1800 IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / TABLE 2.5, TABLE 6, TABLE 10, TABLE 16, TABLE 25, TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400

Flange Forms : Slip On, Socket Weld, Blind, Lapped, Screwed, Weld Neck, Reducing, Spectacle, Slip On Boss, Plate, Plate Blank, Screwed Boss

Product Details: We are offering our client an excellent quality range of ASME Steel Flanges. These ASME Steel Flanges are made from very high quality stainless steel raw material which ensures high durability at its user end. These ASME Steel Flanges are available in various designer patterns and designs. Our range of ASME Steel Flanges are available at most reasonable prices.

Type:Plate flange, Welding Neck Flange, Thread Flange, Socket Welding Flange, Blind Flange, etc. Special Flanges according to drawings.

Pressure:From 150lbs to 2500lbs
PN 0.6Mpa to PN 40M pa

Material:Carbon steel, Stainless steel, Alloy steel

Dimensions:From DN 10 to DN 3000

Product Details: Flanges

A Flanges is an external or internal rib, or rim (lip), for strength, as the flange of an iron beam or I beam (or a T-beam); or for a guide, as the flange of a train wheel; or for attachment to another object, as the flange on the end of a pipe, steam cylinder, etc, or on the lens mount of a camera. Thus a flanged rail is a rail with a flange on one side to keep wheels, etc., from running off. The term "flange" is also used for a kind of tool used to form flanges. All types of flanges i.e, slip on flange, socket weld flange, long weld neck flange, weld neck flange, reducing flange, spectable flange,blind flange, ring joint flange, lapped joint flange, threaded flange, screwed flange, drawing flanges are available for high end industrial requirements. Conforming to different quality standards, flanges are engineered in metals like stainless steel, cabon steel, inconel, monel, nickel, hastelloy titanium, dulex steel, etc. and standards like DIN, ANSI, BS, JIS.

Product Details:

We are the top level manufacturer of lapped joint flanges that are manufactured in compliance with the industrial standards. Used on pipes fitted with lapped pipe or with lap joint stub ends etc., these flanges can be availed in standard as well as customized dimensions.

 

15 NB UP TO 600 NB IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / Table 2.5, table 6, table 10, table 16, table 25, table 40, table 64, table 160, table 320, table 400

FORM : Slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank, screwed boss.

Nickel & Copper Alloy
Nickel Alloy
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ), UNS 4400 (MONEL 400 ), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276)
ASTM / ASME SB 160 UNS 2201 (NICKEL 201)
ASTM / ASME SB 472 UNS 8020 (ALLOY 20 / 20 CB 3)

Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600. ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30)
ASTM / ASME SB 152 UNS NO C 10100, C 10200, C 10300, C 10800 , C 12000, C 12200.

Stainless & Duplex Steel
Stainless Steel
ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H , 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H

Duplex Steel
ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61.

Carbon & Alloy Steel
Carbon Steel
ASTM / ASME A 105. ASTM / ASME A 350 LF 2.

Alloy Steel
ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91.

Product Details:

Our range of Blind Flanges are widely used in various industries owing to its quality features like corrosion and rust resistance, ability to work under high pressure & temperature, easy installation etc. The Blind Flanges require less maintenance and offer a lasting performance.

 

15 NB UP TO 600 NB IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / Table 2.5, table 6, table 10, table 16, table 25, table 40, table 64, table 160, table 320, table 400

Form : Slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank, screwed boss.

Nickel & Copper Alloy
Nickel Alloy
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ), UNS 4400 (MONEL 400 ), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276)
ASTM / ASME SB 160 UNS 2201 (NICKEL 201)
ASTM / ASME SB 472 UNS 8020 (ALLOY 20 / 20 CB 3)

Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600. ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30)
ASTM / ASME SB 152 UNS NO C 10100, C 10200, C 10300, C 10800 , C 12000, C 12200.

Stainless & Duplex Steel
Stainless Steel
ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H , 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H

Duplex Steel
ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61.

Carbon & Alloy Steel
Carbon Steel
ASTM / ASME A 105. ASTM / ASME A 350 LF 2.

Alloy Steel
ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91.

Product Details:

Our range of Screwed Flanges are acknowledge for their high tensile strength and durability. The Screwed Flanges are available in various dimensional specifications and can be customized as per the specifications of our clients

Specifications:

• Range : 15 NB UP TO 600 NB IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / Table 2.5, table 6, table 10, table 16,table 25, table 40, table 64, table 160, table 320, table 400
• Form : Slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank, screwed boss.

Nickel & Copper Alloy:

 
Nickel Alloy:

• ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ), UNS 4400 (MONEL 400 ), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276)
• ASTM / ASME SB 160 UNS 2201 (NICKEL 201)
• ASTM / ASME SB 472 UNS 8020 (ALLOY 20 / 20 CB 3)

Copper Alloy:

• ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600. ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30)
• ASTM / ASME SB 152 UNS NO C 10100, C 10200, C 10300, C 10800 , C 12000, C 12200.

Stainless & Duplex Steel:

 
Stainless Steel:

• ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H , 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H
• Duplex Steel
• ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61.
• Carbon & Alloy Steel
• Carbon Steel
• ASTM / ASME A 105. ASTM / ASME A 350 LF 2.

Alloy Steel:

ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91

A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.



The most used flange types in Petro and chemical industry are..

Welding Neck flange 
Slip On flange 
Socket Weld flange 
Lap Joint flange 
Threaded flange 
Blind flange

All types except the Lap Joint flange are provided with a raised flange face.

Carbon Steel Elbow

Carbon Steel Pipe Fittings Elbow could be a most common sort of CS fitting utilized to connect pipe or tubing to permit a alter of direction, more often than not a 90° or 45° angle, though 22.5 Degree Elbow Carbon Steel is additionally utilized in a piping framework.
Carbon Steel Pipe Fittings Elbow could be a most common sort of CS fitting utilized to connect pipe or tubing to permit a alter of direction, more often than not a 90° or 45° angle, though 22.5 Degree Elbow Carbon Steel is additionally utilized in a piping framework. Carbon steel elbows are metal fittings that change the direction of the pipe on the carbon steel pipe. Connections are threaded and welded. Divided by angle, there are 45 ° and 90 ° 180 ° the three most commonly used, in addition to other engineering needs also include 60 ° and other abnormal angle elbow. Elbow materials are cast iron, stainless steel, alloy steel, malleable iron, carbon steel, non-ferrous metals and plastics. The connections to the tube are: direct welding (the most common method) flange connection, hot melt connection, electrofusion connection, screw connection and socket connection. According to the production process can be divided into: welding elbow, stamping elbow, pushing elbow, casting elbow and so on.Carbon steel elbow is a kind of carbon steel pipe fittings.

Product Details:

We offer a comprehensive range of reducing flanges that is widely used for various industrial applications. Used for connecting, tubings and pipe sections, these reducing flanges are available in various configuration to meet the requirements of our variegated clients.

 

Range : 15 NB UP TO 600 NB IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / Table 2.5, table 6, table 10, table 16, table 25, table 40, table 64, table 160, table 320, table 400

Form : Slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank, screwed boss.

Nickel & Copper Alloy
Nickel Alloy
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ), UNS 4400 (MONEL 400 ), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276)
ASTM / ASME SB 160 UNS 2201 (NICKEL 201)
ASTM / ASME SB 472 UNS 8020 (ALLOY 20 / 20 CB 3)

Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600. ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30)
ASTM / ASME SB 152 UNS NO C 10100, C 10200, C 10300, C 10800 , C 12000, C 12200.

Stainless & Duplex Steel
Stainless Steel
ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H , 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H

Duplex Steel
ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61.

Carbon & Alloy Steel
Carbon Steel
ASTM / ASME A 105. ASTM / ASME A 350 LF 2.

Alloy Steel
ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91.

Product Details: Steel threaded flange are offered in different pressure ratings, dimensions and other specifications. These threaded flanges are made of highest quality stainless steel.Varied range of threaded flange includes: Threaded Flange, threaded pipe flange, threaded reducing flange, ANSI threaded flange, blind flange, welding neck flange etc.
Stainless Steel : ASTM A 182, A 240

Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750

Carbon Steel : ASTM A 105, ASTM A 181

Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276

Copper Alloys : Copper, Brass & Gunmetal

Size : 1/8" NB TO 48"NB.

Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #

Product Details:

We are a prominent manufacturer of ring joint flanges that are fabricated using superior grades of steel and other alloys. Suitable for various industrial usages, thering joint flanges are resistant to heat, and are extremely durable and reliable with the ability to withstand any amount of stress.

 

Range : 15 NB UP TO 600 NB IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / Table 2.5, table 6, table 10, table 16, table 25, table 40, table 64, table 160, table 320, table 400

Form : Slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank, screwed boss.

Nickel & Copper Alloy
Nickel Alloy
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ), UNS 4400 (MONEL 400 ), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276)
ASTM / ASME SB 160 UNS 2201 (NICKEL 201)
ASTM / ASME SB 472 UNS 8020 (ALLOY 20 / 20 CB 3)

Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600. ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30)
ASTM / ASME SB 152 UNS NO C 10100, C 10200, C 10300, C 10800 , C 12000, C 12200.

Stainless & Duplex Steel
Stainless Steel
ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H , 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H

Duplex Steel
ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61.

Carbon & Alloy Steel
Carbon Steel
ASTM / ASME A 105. ASTM / ASME A 350 LF 2.

Alloy Steel
ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91.