Parmar Steel

• Industrial bolts:Stud bolts, hex head bolts, socket hexagon head screw anchor bolts, u-bolts, j bolts, mushroom head square neck bolts, t- head bolts, wing screw bolts, eye bolts, eye bolts, foundation bolts, structural bolts, 304h bolts, 304h sockets cap screws, 310 h bolts
• Industrial nuts:Hexagon nuts, hexagon coupling nuts, hexagon thin nuts, square nuts, hexagon castle nuts, self locking nut, hexagon domed cap nuts.
• Industrial washers:Plain washer, plain big & small washers, spring lock washers, spring washers heavy duty, tooth washers, star washers, tab washer with one & two tab
• Industrial Screws:Pan Head Slotted Screws, Hexagon Head Screws, Cheese Head Slotted Screws, Countersunk Head Slotted Screws, Countersunk Raised Head Slotted Screws, Pan Phillipse Head Screws, Countersunk Phillipse Raised Head Screws

We are instrumental in offering our clients with a quality range of stainless steel Fasteners that is fabricated using stainless steel and nickel alloy. Highly appreciated for its high tensile strength, rust resistance and durability, these fasteners are available in different sizes. Available in several grades like industrial washers, industrial screws, stainless washers, threaded rod and stainless screws, these fasteners are extensively used in various industrial operations. These fasteners are hot dipped galvanized and coated with phosphate, teflon, xylon, zinc or cadmium as per the request of our clients. We also provide these fasteners along with manufacturer test certificate as per EN 10204 / 3.1B.

Following are the types of fasteners offered by us:
Type:
Grades and Specifications:
Nickel Alloy Fasteners:

• Standard: ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
• Grade: UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)
• Stainless Steel Fasteners
  Standard: ASTM / ASME A/SA 193 / 194
  Grade: B 8 (304), B 8C (SS 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4
• Alloy Steel Fasteners
• Standard: ASTM / ASME A/SA 193 / 194 GR
• Grade: B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M Duplex Steel UNS NO.S 31803, S 32205
• Range:
• M10 to M100 , Length Upto 5 Meters
• Bolts:
• Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolts, U-bolts, J Bolts, Mushroom Head Square Neck Bolts , T- Head Bolts , Wing Screw , Eye Bolt , Eye Bolt, Foundation Bolts, Structural Bolts.
• Washer:
• Plain Washer , Plain Big & Small Od Washer , Spring Lock Washer , Spring Washer Heavy Duty , Tooth Washer , Star Washer , Tab Washer with One & Two Tab .
• Nuts:
• Hexagon Nuts , Hexagon Coupling Nuts , Hexagon Thin Nut , Square Nut , Hexagon Castle Nuts , Self Locking Nut , Hexagon Domed Cap Nuts.
• Screw:
• Pan Head Slotted Screws , Cheese Head Slotted Screws , Countersunk Head Slotted Screws , Countersunk Raised Head Slotted Screws , Pan Phillipse Head Screw , Countersunk Phillipse Raised Head Screws , Slotted Cheese Trim Head Machine Screws , Socket Head Allen Cap Screws , Allen Countersunk Socket Head Cap Screws , Socket Head Shoulder Screws , Socket Head Cap Screw Low Head , Hexagon Socket Set Screw with Flat Point , Hexagon Socket Set Scews with Cone Point , Hexagon Socket Set Screw with Point , Hexagon Socket Set Screws with Point, Hexagon Socket Set Screws with Cup Point , Imprial Socket Cap Screws 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

• Property Class : 4.8, 5.6, 5.8, 8.8, 10.9, 12.9
• Coating : Bright Zinc Plated, Hot Dip Galvanised, Phosphatided, Nickel Plated
• Material : 22CrMo4, 24CrMo4, 25CrMo4, 26CrMo4, 34CrMo4, 42CrMo4, 34CrNiMo6, 41CrNiMo6
• Material : AISI 4130, SAE 4130, AISI 4140, SAE 4140, AISI 4145, SAE 4145, AISI 4340, SAE 4340
• Material : EN 8, EN 9, EN 19, EN 24 Condition : Normalised, Tempered, Quenched & Tempered

Our expertise helps us to supply, trade and wholesale, qualitative range of SS Hex Bolts for various applications. Our offered range of product are highly acclaimed for their various cutting edge features such as corrosion resistance & tear resistance. These bolts are available with us at very reasonable price.

Features:

• Superior basic material
• Advanced technology
• Widely appreciated

• Long :- 10mm To 200mm
• Threaded :- Metric / Half / Full.
• Test Certificate :- With Lab Test Certificate.

We have on offer for our customers a quality range of Stainless Steel Bolts, which is manufactured using superior quality steel bars. Highly appreciated for durability, these nuts & bolts find widespread application in all types of general and specific engineering fields. Our range can withstand rigorous working conditions, as it displays high degree of tenacity and strong anti-corrosion qualities.

• Stainless steel :   Aisi 302, 304, 304L,316, 316L, 310, 317, 317L, 321, 347, 410, 420,904L etc.
• Carbon steel:    Bare condition, galvanized, phosphetised, cadium plated, hot deep galvanized, bloodied, nickel chrome plated, etc.
• Alloy steel:  4.6 , 5.6, 6.6, 8.8, 10.9 & 12.9 / 'r', 's', 't' conditions.
• Non ferrous metal:    Copper, brass,aluminium, titanium, nichrome, al.Bronze Phosphorous bronze, etc.

• Easy to install
• High tolerance power
• Durability

Additional Information:

• Production Capacity: As per requirement
• Delivery Time: Ready stock
• Packaging Details: Standard

• Range: 15 mm to 150 mm
• Pressure Class: ANSI 150# to 800#
• End Connections: Flanged, Screwed Socket Weld & Butt Weld Ends
• Manufacturing Standards: BS 5351 / BS-5159
• Testing Standard: API-598, BS 6755 , BS 5146
• Face to Face: as per ANSI B 16.1 RF (150#)
• End Flanges: as per ANSI/BS/DIN
• MOC: ANSI 304/316, ASTM A, 351 Gr,CF 8 / CF-8M / CF-3 / CF-3M/ CN-7M / HAST ALLOY C / ASTM A 216 WCB / LCB ETC

• HOT DIPPED GALVANIZING
• EPOXY & FBE COATING
• ELECTRO POLISH
• DRAW & EXPANSION BENDING BUFFING

• UNS 8800 (INCONEL 800)
• UNS 8825 (INCONEL 825)
• UNS 6600 (INCONEL 600)
• UNS 6601 (INCONEL 601)
• UNS 6625 (INCONEL 625)

We convey forth for our patrons a widespread variety of high superiority Stainless Steel Hex Bolt that use in industrial process. Our capable professionals make use of lofty grade indispensable fabric and high-end technology to produce this High Tensile Bolt in conformity with global principles. Supplementary, at our end, the complete gamut of manufacture is carefully tested nearby various excellence parameters by our excellence controllers. We give this High Tensile Bolt to our patrons at cost effectual prices.

Size & Grade:

• Long :- 10mm To 200mm
• Threaded :- Metric / Half / Full.
• Test Certificate :- With Lab Test Certificate.

Other Information:

• Pay Mode Terms: T/T (Bank Transfer), Western Union
• Minimum Order Quantity: 100 Pieces
• Production Capacity: 1000 Tonnes
• Delivery Time: Ready Stock

Product Description:

We are engaged in manufacturing, trading and supplying a wide assortment of Gate Valve. Offered product is used for controlling liquid flow. The offered range is available in various specifications as per the varied needs of clients. Clients can avail these products from us at the most reasonable price range. In addition to this, our precious clients like these products for features given below.

Features:

• Durability

• Easy installation

• Compact design

Specifications:

Aluminium Alloy Sheet 6082(T651) is manufactured under the following sizes and specifications. Also the material shall be supplied correctly as per your required size and specification, your detailed technical data/drawing for those items with valued enquires.

Available Sizes

Alloy 6082 is available from 6mm to 200mm.

Characteristics

Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, Aluminium alloy 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of Aluminium alloy 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy. In the T6 and T651 temper, Aluminium alloy 6082 machines well and produce tight coils of swarf when chip breakers are used.

Typical Applications

Aluminium alloy 6082 is typically used in High stress applications, Trusses, Bridges, Cranes, Transport applications, Ore skips, Beer barrels and Milk churns.

Additional Information:

• Production Capacity: As per requirement
• Delivery Time: Ready stock
• Packaging Details: Standard

• Require a weldable alloy of high to moderate strength, with good corrosion resistance. Marine applications, unfired welded pressure vessels, TV towers, drilling rigs, transportation equipment, armour plate.

• Aluminum 5083 is a strong magnesium-manganese-chromium-Aluminum alloy. It can be hardened by cold work, but is not heat treatable to higher strength. It has good ductility for the strength level, better than most other 5000 series alloys (see figure).

• Alloy 5083 has excellent resistance to general corrosion, and is used in marine applications. Resistance is excellent in aqueous solutions in the pH range 4 – 9. The corrosion resistance of Aluminum alloys relies on a protective surface oxide film, which when damaged is readily repaired by the rapid reaction between Aluminum and oxygen. However, the high reactivity of the base metal can give rapid corrosion if the film cannot be repaired, so Aluminum alloys are not suitable for use with reducing media. Alloy 5083 can be anodised to improve the corrosion resistance by thickening the protective surface film. Alloy 5083 can be susceptible to exfoliation corrosion in severe applications. Material in the H116 temper is least susceptible, and passes the ASTM G66 Exfoliation Susceptibility Test (ASSET Test). AS 1734 suggests alloy 5083 should not be used above 65°C.

• AS1210 Pressure Vessels pre-qualifies alloy 5083 for pressure service for temperatures up to 65°C in the O, H112 & H321 tempers.

Duplex 2205 Stainless Steel Rods are a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades. It also demonstrates good fatigue strength, as well as outstanding resistance to stress corrosion cracking, crevice, pitting, erosion, and general corrosion in severe environments.

• Chemical processing, transport and storage – pressure vessels, tanks, piping, and heat exchangers
• Oil and gas exploration and processing equipment – piping, tubing, and heat exchangers
• Marine and other high chloride environments
• Effluent scrubbing systems
• Pulp and paper industry – digesters, bleaching equipment, and stock-handling systems
• Cargo tanks for ships and trucks
• Food processing equipment
• Biofuels plants

• ASTM/ASME: A240 UNS S32205/S31803
• EURONORM: 1.4462 X2CrNiMoN 22.5.3
• AFNOR: Z3 CrNi 22.05 AZ
• DIN: W.Nr 1.4462

We PARMAR STEEL, are one of the leading trader and supplier of Bronze Rods.

Equivalent Specifications

• ASTM B140
• B140M (Copper Alloy UNS No. 31400)

Chemical Composition

We Swagat Steel And Alloys, are one of the Leading, manufactures & suppliers of Aluminium Bronze Rod.

Features:

• High tensile strength
• Better operational life
• Convenient handling
• Corrosion resistant

Specifications of Aluminum Bronze

• ASTM B 111 C60800
• ASME SB 111 C 60800
• EN 12451 CuAl5As
• CW200G

Chemical Composition

• Bushes with Different grades and Sizes as per requirement
• Like Commercial Grade or 85/5/5/5 or 88/12 or 90 /10
• Size - Any Size bush with minimum 8 to 8 mm thk for casting ( in San Casting or Continues Casting

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Cast Iron Dual Plate Check Value for our valued clients. These are designed and developed using premium quality S.G. iron/S.S.304 flaps in line with the defined parameters DIN PN-16 so as to live up to the expectations of the clients. Available in different grades like slim seal, wafer, lug and pneumatic slim type with cast iron and stainless steel disc, these valves can be availed in customized forms. Endowed with several feature such as longer service life, high tensile strength and sturdiness, the offered valves perform excellent in variegated industrial applications.

Specifications:

* 'SANT' Cast Iron Dual Plate Wafer Type Check valve
* Rating PN16 with ductile iron disc
* Stainless steel spring
* EPDM body lining

Application:

Water supply and sewage, chemicals and petrochemicals, processing, power generation and utilities, paper, pulp and ship building.

Additional Information:

• Production Capacity: As per requirement
• Delivery Time: Ready stock
• Packaging Details: Standard

• Slip On Flanges, Socket Weld Flanges, Blind Flanges, Lapped Flanges, Screwed Flanges, Weld Neck Flanges, Reducing Flanges, Spectacle Flanges, Slip On Boss Flanges, Plate Flanges, Plate Blank Flanges, Screwed Boss Flanges.

• Raised Face, Flat Face, Lapped Joint Face, Large Male-Female, Small Male-Female, Large Tongue & Groove, Small Tongue & Groove, Ring Joint

• 125 Lb, 150 Lb, 300 Lb, 600 Lb, 900 Lb, 1500 Lb, 2500 Lb, 3000 PSI, 5000 PSI & 10000 PSI

• Inconel 800 (UNS No. N08800)
• Inconel 825 (UNS No. N08825)
• Inconel 600 (UNS No. N06600)
• Inconel 625 (UNS No. N06625)
• Inconel 601 (UNS No. N06601)
• Size : 1/8" NB TO 48"NB.

• Standards :ASTM / ASME SB 564
• Grades : Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
• Size :1/8" NB TO 48"NB.

• Socket Weld
• Weld Neck
• Slip on
• Long Weld Neck
• Blind
• Reducing
• Lapped
• Spectacle
• Screwed
• Ring Joint

• Standard: ASTM A213, ASTM A269, ASTM A249
• Grade:2, 3, 5 and 12
• Outside diameter: 6MM ~ 152.4MM
• Wall thickness: 0.9 ~ 4 MM Thk.
• Maximum length: 12m

• Socket Weld
• Weld Neck
• Slip on
• Long Weld Neck
• Blind
• Reducing
• Lapped
• Spectacle
• Screwed

• Fine finish
• Durable
• Corrosion resistant

• High quality
• Corrosion resistant
• Efficient
• Durable

• Reliable
• Quick delivery
• Ready for bulk dealing
• International standard

• Corrosion resistance
• Long service time
• High tensile strentgh

• Standard: ASTM / ASME SB 619/622/626
• Grades: Hastelloy C-4 (UNS No. N06455), C-276 (UNS No. N10276), Hastelloy C 22 (UNS No.N06022), Hastelloy C 2000

• Bright
• Black
• Polish

• Round
• Square
• Hex (A/F)
• Rectangle
• Flat
• Bush

Application Drinking Water Utilities Water Chemical Handling Gas Handling Food Products

• Hastelloy C-4 (UNS No. N06455)
• C-276 (UNS No. N10276)
• Hastelloy C 22 (UNS No. N06022)
• Hastelloy C 2000

Additional Information:

• Production Capacity: As per requirement
• Delivery Time: Ready stock
• Packaging Details: Standard

• Hastelloy C-4 (UNS No. N06455)
• C-276 (UNS No. N10276)
• Hastelloy C 22 (UNS No. N06022)
• Hastelloy C 2000 B366

• ASTM: B622, B619, B622, B626
• Size range: 6mm OD to 254mm OD in 0.2mm thickness to 20mm thickness
• Types:Seamless, ERW, welded, fabricated
• Grades:Hastelloy C276 (UNS No. N10276)

• Standards: ASTM / ASME SA 790.
• Grades: UNS NO. S 31803, S 32205, S 32550, S 32750, S 32760

Super Duplex Steel Round Bar

Swagat Steel And Alloys are one of the leading stockiest , Supplier and exporters of Super Duplex Round bar, which are imported by us directly from European and American Mills. These High corrosion Super Duplex Material are used in Oil & Gas, Heat Exchanges, Aerospace , Pharmaceutical , Defense . we are confident that we will meet your requirement to your utmost satisfaction.

- Range: 6mm dia 300mm dia ( Dia in Inches 10 ).

- Standard: ASME SB 4446 /AMS 5666 /5837 ASME SB- 564

- Form: Round, (Square, Rectangular bar: Forged ).
Round Bar in Super Duplex UNS S32750 & S32760.

Gun metal

Leveraging on our vast experience in the specific industry, we Swagat Steel And Alloys offer a large variety of products made with gunmetal alloys that includes gun metal rods, gun metal bars and more. These gunmetal alloys are acclaimed for their sturdiness, resistance from salt & steam, good strength and rust resistance. Our range is used for bearings where loads and speeds are moderate. We offer gunmetal alloys in vast variety of grades and specifications which are catering to the demands of different industries.

• Seamless finish
• Abrasion resistance
• Easy to install

We are counted among one of the market leaders engaged in manufacturing, supplying and exporting finest quality MS Foundation Bolts. Designed with precision, these bolts are manufactured as per the set international quality standards with the support of innovative techniques and latest machinery. In addition to this, these are checked on various aspects during production to deliver clients with quality approved MS Foundation Bolts. We are offering these bolts at most affordable prices.

Features:

•   Durable

•   High material strength

•   Dimensional accuracy

•  Excellent finish

Additional Information:

• Item Code: 7318
• Production Capacity: 1000KG
• Delivery Time: READY STOCK
• Packaging Details: GUNNY

• Stainless Steel Standards: Astm / Asme A/Sa 193 / 194
• Stainless Steel Grade: B 8 (304), B 8C (Ss 347), B 8M (Ss 316), B 8 T (Ss 321), A 2, A 4
• Duplex Steel Standards: UNS No.S 31803, S 32205.
• Nickel Alloy Standards: Astm / Asme Sb 160 / 164 / 425 / 166 / 446 / 574 / 472
• Nickel Alloy Grades: Uns 2200 (Nickel 200) / Uns 2201 (Nickel 201), Uns 4400 (Monel 400), Uns 8825 (Inconel 825), Uns 6600 (Inconel 600) / Uns 6601 (Inconel 601), Uns 6625 (Inconel 625), Uns 10276 (Hastelloy C 276), Uns 8020 (Alloy 20 / 20 Cb 3)
• Alloy Steel Standards: Astm / Asme A/Sa 193 / 194 Gr.
• Alloy Steel Grades: B 6, B 7/ B 7M, B 16, 2, 2Hm, 2H, Gr 6, B 7, B 7M.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)